Rain Gauge With Bracket


Leveraging on our years of experience in this domain, we have been able to provide a wide collection of Rain Gauge with Bracket. It is sourced by our professionals from the leading vendors of the market in order to ensure its quality and high operational accuracy.


Features
:

 

  • Use metal spike to mount in ground
  • Simple and easy to use
  • Mounts on wall or fence with bracket

Specification:

General:

 

  • Operating Temperature: -40° to +150° F (-40° to +65° C)
  • Storage Temperature: -50° to +158° F (-45° to +70° C)
  • Transducer: Silicon photo diode
  • Spectral Response (10% points): 400 to 1100 nanometers
  • Cosine Response
  • Percent of Reading: ±3% (0° to ±70° (incident angle), ±10% (±70° to ±85° incident angle)
  • Percent of Full Scale: ±2% (0° to ±90°)
  • Supplied Cable Length: 3′ (0.9 m)
  • Cable Type: 4-conductor, 26 AWG

 

I/O Specifications:

 

  • Green wire: Output (0 to +3 VDC); 1.67 mV per W/m2
  • Correction per degree above reference temp: -0.067% of reading per °F (-0.12% per °C)
  • Correction per degree below reference temp: 067% of reading per °F (+0.12% per °C)
  • Housing Material: UV-resistant PVC plastic
  • Dimensions (Length x Width x Height): 2.00″ x 2.75″ x 2.25″ (51 mm x 70 mm x 57 mm)
  • Weight: 0.5 lbs. (226 g)
  • Red & Black wires: Ground
  • Yellow wire: +3 VDC ±10%; 1 mA (typical)
  • Temperature Coefficient: +0.067% per °F (+ 0.12% per °C)
  • Reference temperature: 77° F (25° C)

 

Sensor Output:

 

  • Resolution and Units: 1 W/m2
  • Drift: up to ±2% per year
  • Update Interval: 50 seconds to 1 minute (5 minutes when dark)
  • Range: 0 to 1800 W/m2
  • Accuracy: ±5% of full scale (Reference: Ripley PSP at 1000 W/m2)